Panasonic HDC-SDT750, Руководство по эксплуатации

Страница: 77 / 163

77
VQT3B52
Parts where white saturation (colour saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern).
≥
Change the mode to or .
≥ Switch to manual mode. ( l 83)
≥ You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (iris/gain) (
l 85).
≥
The zebra pattern does not appear on the images actually recorded.
Displays the luminance level of the centre of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance
level of the object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (
l 85)
≥
Change the mode to or .
≥
Switch to manual mode. ( l 83)
≥
Luminance level is displayed between [0%] and [99%]. It will be displayed as [99% ] when
it is over 99%.
≥ Luminance is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF].
[ZEBRA]
: [RECORD SETUP]
#
[ZEBRA]
#
[ON]
≥
It is possible to set from the quick menu in manual
mode. (
l 36)
[LUMINANCE]
: [RECORD SETUP]
#
[LUMINANCE]
#
desired setting
≥ It is possible to set from the quick menu in manual mode. ( l 36)
[OFF]:
Cancel the setting.
[ANYTIME]:
Constantly display.
[ON ADJUST]:
Display only when [IRIS] is adjusted. (
l
85)
A
Luminance display frame
B
Luminance level
A
Zebra pattern
50%