74
VQT3B52
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥
Change the mode to
.
≥
Switch to manual mode. (
≥
This function’s default setting is [ON].
≥
When switching to intelligent auto mode, [WIND NOISE CANCELLER] is set to [ON], and
the setting cannot be changed.
≥
You may not see the full effect depending on the recording conditions.
≥
If wind sound cannot be reduced with the wind noise canceller function alone, set [BASS
SETTING] to [LOWCUT]. (
Recording setting of the built-in microphone can be adjusted.
≥
Change the mode to
.
≥
Switch to manual mode. (
≥
If you wish to record higher quality sound and maintain realism even when zooming in, for
instance recording a music recital, we recommend setting [MIC SETUP] to [SURROUND].
[WIND NOISE CANCELLER]
: [RECORD SETUP]
#
[WIND NOISE CANCELLER]
#
[ON]
[MIC SETUP]
: [RECORD SETUP]
#
[MIC SETUP]
#
desired setting
[SURROUND]:
Sound is recorded with 5.1 ch surround microphone.
[ZOOM MIC]:
Directivity of the microphone is interlocked with the zoom
operation. Sounds near the front of the unit are recorded
more clearly if you zoom in (close-up) and surrounding
sounds are recorded more realistically if you zoom out
(wide angle).
[FOCUS MIC]:
Directivity of the centre is enhanced for recording audio
near the front of the unit more clearly.
[STEREO MIC]:
Sound from two directions is recorded in 2 ch by forward-
facing stereo microphones.
