47
VQT1H62
Recording
≥
If the write protection switch on the SD card is
set to LOCK, it cannot be used for recording.
≥
The PHOTO SHOT button on the remote
control cannot be pressed halfway.
≥
If the [PICT. QUALITY] is set to [
],
mosaic-pattern noise may appear on a
playback image depending on the picture
content.
≥
While this unit accesses the SD card (
is
displayed/the card access lamp is lit), do not
perform the following operations. The SD card
or the recorded data may be damaged.
j
Turn the unit off.
j
Open the SD card/battery cover and remove
the SD card.
j
Operate the mode dial.
≥
Other products may degrade or not playback
still pictures recorded on this unit.
≥
The edges of still pictures recorded on this unit
with a 16:9 aspect ratio may be cut at printing.
Check the printer or photo studio before
printing.
ª
About the screen indications
when the PHOTO SHOT button is
pressed halfway
A
Flash (
l
54)
B
Flash level (
l
55)
C
Red eye reduction (
l
55)
D
Quality of still pictures (
l
48)
E
Size of still pictures
F
Remaining number of still pictures
(Flashes in red when [0] appears.)
G
Card indication (
l
110)
H
MEGA optical image stabilizer (
l
56)
ª
About the focus indication
≥
The focus indication indicates the status of the
auto focus.
≥
The focus indication does not appear in
manual focus mode.
≥
Focus on a subject manually when it is not
easily focused automatically.
≥
You can record still pictures on the card even if
the focus indication does not appear, but
pictures may be recorded without being
focused.
≥
The focus indication does not appear or has
difficulty displaying in the following cases.
j
When the zoom magnification is high.
j
When the unit is shaken.
j
When the subject is moving.
j
When the subject stands in front of a light
source.
j
When close subjects and far subjects are
included in the same scene.
j
When the scene is dark.
j
When there is a bright part in the scene.
j
When the scene is filled with only horizontal
lines.
j
When the scene lacks contrast.
j
When recording motion pictures.
j
When the MagicPix function is used.
j
When PRE-REC is used
ª
Concerning the focusing area
When there is a contrasting object ahead or
behind the subject in the focus area, the subject
may not be focused. If so, move the contrasting
object out of the focus area.
≥
If it is difficult to focus, adjust the focus
manually.
≥
The focusing area is not displayed when the
digital zoom (more than approx. 10
k
) is used.
You can add a shutter sound when recording still
pictures.
Press the MENU button, then select
[PICTURE]
#
[SHTR SOUND]
#
[ON] or [OFF]
and press the cursor
button.
≥
This function’s default setting is [ON].
≥
This function does not work during motion
picture recording.
2.1
Ｍ
750
750
750
MEGA
A BC D E F G H
Switching the shutter sound on/
off
VQT1H62_ENG_PP.book 47 ページ ２００７年７月１７日 火曜日 午後５時４４分
