Panasonic HDC-SD40P, Руководство по обслуживанию

Страница: 25 / 36

S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. SD Holder P.C.B. ................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. SD Holder Schematic Diagram ............................................. S-5
S5. Print Circuit Board .................................................................... S-6
S5.1. SD Holder P.C.B. ................................................................... S-6
S6. Replacement Parts List ............................................................ S-7
S7. Exploded View ....................................................................... S-11
S7.1. Frame and Casing Section.................................................. S-11
S7.2. Packing Parts and Accessories Section .............................. S-12
Table of contents
Service Manual
VM1103011CE
Diagrams and Replacement
Parts List
Vol. 1
Model No.
HDC-SD40P
HDC-SD40PC
HDC-SD40PU
HDC-SD40EB
HDC-SD40EC
HDC-SD40EE
HDC-SD40EF
HDC-SD40EG
HDC-SD40EP
HDC-SD40GA
HDC-SD40GC
HDC-SD40GK
HDC-SD40GN
HDC-SD40GW
HDC-SD41EB
HDC-TM40P
HDC-TM40PC
HDC-TM40PU
HDC-TM40EB
HDC-TM40GD
HDC-TM40GK
HDC-TM41P
High Definition Video Camera
[HDC-SD40] [HDC-TM40]
(W)..........White Type (only EB/EC/EE/EF/EG/EP)
Colour
[HDC-SD41]
(H)...........Glay Type
(K)...........Black Type
(H)...........Glay Type
(K)...........Black Type
[HDC-TM41]
Name of Signal
OFTR FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice