Panasonic HDC-SD1, Руководство по эксплуатации

Страница: 112 / 140

Others
112
VQT1A24
When the SD card is accessed, you try to playback a scene or faulty control information is read, one of
the messages below may be displayed. (Depending on the error, this may take time.)
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[FINISHED.]
When the remaining capacity of the battery is low:
[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[THUMBNAIL DATA HAS BEEN REPAIRED SUCCESSFULLY.]
When the remaining capacity of the battery is low:
[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]
≥
Use a sufficiently charged battery or the AC adaptor.
≥
Depending on the condition of the data, it may not be possible to completely repair the data.
≥ If the recovery fails, you will no longer be able to playback the scenes recorded before the power went
off.
≥ When data recorded on another device is recovered, it may not be possible to play back the data on
this unit or the other device.
≥
If the recovery fails, format the SD card on this unit.
≥
If the thumbnail information is recovered, displaying the thumbnails may become slower.
About recovery
CONTROL DATA ERROR HAS BEEN
DETECTED.
THUMBNAIL DATA ERROR IS
DETECTED.
VQT1A24_ENG_PP.book 112 ページ ２００７年１月２１日 日曜日 午後１時１７分