Panasonic HDC HS100 - Flash Memory High Definition Camcorder, Руководство по эксплуатации

Страница: 38 / 144

38
VQT1U19
The images recorded between pressing the recording start/stop button to start recording and
pressing it again to pause recording become one scene.
When about 5 minutes have passed without any operation in recording pause, the unit automatically
turns off to prevent the battery from running down. When you want to use the unit, turn it on again.
This power save feature can also be set to [OFF]. ([POWER SAVE]:
26)
(The maximum number of recordable pictures on a single SD card or HDD)
Maximum number of recordable scenes: 3900
Maximum number of different dates: 200 (
74)
When either of them reaches to the maximum limit, more scenes cannot be recorded.
When recording motion pictures, do not remove the battery or disconnect the AC adaptor. Also, do not
remove the SD card while the card access lamp lights up. If you do either of the above, the recovery
operation will begin when the SD card is next inserted or the power is turned back on. (
125)
Put the unit in pause mode when connecting or disconnecting an external microphone with the MIC
terminal. If an external microphone is connected or disconnected while recording, the audio will not
be recorded properly.
Still pictures can be recorded while recording the motion picture. ( 41)
A message is displayed and you cannot record when the HDD does not operate normally due to the
temperature of the unit being too high or low, or when the SD card cover cannot be closed due to
failure of the SD card cover. In this case, press the recording start/stop button to display the media
change message, allowing you to change the recording media.
"
Screen indications in the
recording mode Recording mode
! Remaining time left for recording
(When the remaining time is less than
1 minute, [R 0h00m] flashes red.)
" Recording time elapsed
Each time the unit is put into recording
pause, the counter display will be reset to
“0h00m00s”.
About the compatibility of the recorded motion pictures
They are not compatible with devices other than those that support AVCHD. Images cannot be
played with equipment that does not support AVCHD (ordinary DVD recorders). Confirm that your
equipment supports AVCHD by referring to the operating instructions.
There are some cases where the recorded motion pictures cannot be played back, even if the
device supports AVCHD. In such cases, play the recorded motion picture with this unit instead.
0h00m00s 0h00m00s
R 1h20m R 1h20m
When motion picture recording stops suddenly
For some SD cards, the message appears suddenly, and recording
stops.
Use a Panasonic SD card or another SD card which can be used to
record motion pictures. (
21)
When the unit stops while a usable SD card for recording motion
pictures (
21) is used, the data writing rate has deteriorated.
We recommend formatting the SD card being used. ( 87) When an
SD card is formatted, all the data recorded on it will be deleted so copy
valuable data to the PC prior to formatting. (
108)