Panasonic HDC-DX1, Руководство по эксплуатации

Страница: 80 / 128

80
VQT1A15
Disc and card management
Disc and card
management
Formatting
(RAM) (-RW)
Please be aware that if a disc is formatted,
then all the data recorded on the disc will be
erased.
¬
Rotate the mode dial to select or
rotate the mode dial to and then
select the [ ] (motion picture
playback) tab.
1
Press the MENU button, then
select [SETUP]
#
[FORMAT DISC]
#
[YES] and
press the cursor button.
2
When the confirmation message
appears, select [YES], then press
the cursor button.
≥
When formatting is complete, press the
MENU button to exit the message screen.
≥ Use this unit to format discs.
≥
In the case of a double sided disc, format each
side.
≥
It may not be possible to format a disc with
many scratches or dirt. Such discs cannot be
used.
≥
During formatting, do not turn this unit off.
≥
When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
(SD)
Please be aware that if an SD card is
formatted, then all the data recorded on the
card will be erased. Store important data on a
computer, etc.
¬
Rotate the mode dial to select or
.
1
Press the MENU button, then
select [SETUP]
#
[FORMAT CARD]
#
[YES] and
press the cursor button.
2
When the confirmation message
appears, select [YES], then press
the cursor button.
≥
When formatting is complete, press the
MENU button to exit the message screen.
≥ Use this unit to format SD cards. If an SD card
is formatted on other products (such as a
computer), the time spent for recording may
become longer and you may not be able to use
the SD card.
≥
Depending on the type of SD card being used,
it may take time to format.
≥
During formatting, do not turn this unit off.
≥
When you format the SD card, use a battery
with sufficient battery power or the AC adaptor.
≥ Do not remove the SD card while formatting.
Formatting discs
This is for initializing discs.
MENU
Formatting an SD card
This is for initializing SD cards.
MENU
VQT1A15ENG.book 80 ページ ２００７年１月２９日 月曜日 午後８時２４分