![background image](http://html.mh-extra.com/html/panasonic/hcm270/hcm270_operating-instructions-manual_277500087.webp)
Operating Instructions
[For assistance, please call: 1-800-272-7033]
87
3.5.10
External Output Control
External Output Control window
enables the External Device Control Output
signal to activate the external sensors/devices. (Open or Short to GND) The
network administrator should set up this setting.
Note
Refer to page 106 for Interfacing to the External I/O.
1.
Click
[External Output Control]
on Setup Page.
2.
Check
[Open]
means the External Device Control Output becomes high
impedance (open collector).
Check
[Short to GND]
means the External Device Control Output becomes
low (0V).
3.
Click
[Save]
to send the signal.
•
Click
[Cancel]
to quit the current settings. The window returns to Setup
Page without saving the parameters.
Содержание HCM270
