Panasonic HC-X1, Руководство по эксплуатации

Страница: 66 / 234

- 66 -
Setting the White Balance mode to [VAR] allows you to set a White Balance value between 2000K
and 15000K.
≥
Use the jog dial to change the settings.
≥ Switch to Manual Mode. ( l 44 )
1 Set the White Balance mode to [VAR]. ( l 63 )
2 Rotate the jog dial to adjust the color balance.
3 Push the jog dial to finish the adjustment.
≥
You can also access this setting by selecting menu items.
[SW SETUP]
#
[WB VAR] ( l 171 )
≥
The set value is not guaranteed to be an exact value. Use it only as a guide.
≥ Register [AWB] to a USER button. ( l 82 )
1 Fill the screen with a white subject or place a white piece of paper in front of
the lens.
2 Press the WHITE BAL button to switch to [Ach] or [Bch].
3 Press the USER button to which [AWB] is registered or touch the applicable
USER button icon to set the Auto White Balance mode.
≥
Adjust the Black Balance first, and then the White Balance. The screen goes dark momentarily,
“WB SET OK” is displayed, and the adjustment ends.
≥
If you have pressed the USER button to which [AWB] is registered or touched the applicable
USER button icon, only the White Balance is adjusted. When “WB SET OK” is displayed, the
adjustment is complete.
≥
When the White Balance mode is set to a setting other than [Ach] or [Bch], if you press and hold
the USER button to which [AWB] is registered or touch and hold the applicable USER button icon
while recording is paused, Auto Black Balance will operate. Setting is completed when the screen
goes black momentarily and “BB SET OK” is displayed.
≥
When the Auto White Balance/Auto Black Balance cannot be performed, an error message
“WB SET NG” or “BB SET NG” is displayed on the screen. In such case, use other mode.
≥
It is not possible to operate Auto White Balance or Auto Black Balance without registering [AWB]
to a USER button.
≥
The contents previously set are maintained in the [Ach] or [Bch]. Perform the setting again when
the recording condition has changed.
≥
A color temperature value that is displayed after Auto White Balance is enabled is not guaranteed
to be an exact value. Use it only as a guide.
To finely adjust the White Balance
To set the White Balance in accordance to the recording scene
HC-X1_GD_DVQP1183ZA_eng.book 66 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分