- 63 -
Automatic White Balance function may not reproduce natural colors depending on the scenes or
lighting conditions. If so, you can adjust the White Balance manually.
≥
Register [AWB] to a USER button. (
)
This function is registered to the USER9 button by default.
≥
Switch to Manual Mode. (
1
Press the WHITE BAL button to switch to [Ach], [Bch], or [PRST].
≥
The setting changes each time you press the button.
[Ach]
#
[Bch]
#
[PRST]
≥
If you switch to [PRST], the White Balance mode set in [WB PRESET] will be displayed.
2
(If you have switched to [
PRST
])
Press the USER button to which [AWB] is registered or touch the applicable
USER button icon to change the White Balance mode.
≥
The mode will change each time you press the USER button to which [AWB] is registered or
touch the applicable USER button icon.
[P3200K]
#
[P5600K]
#
[VAR]
≥
It is not possible to change the White Balance mode without registering [AWB] to a USER button.
≥
If you set the White Balance mode to [
ATW] in by following either of the procedures below, the
White Balance mode cannot be changed even if you press the USER button to which [AWB] is
registered or touch the applicable USER button icon.
j
Pressing the USER button to which [ATW] is registered (
j
Pressing the WHITE BAL button to switch to the item (Ach/Bch/PRST) setting in [ATW SET]
(
)
White Balance
A
White Balance
B
Color temperature display
≥
Displayed when the White Balance mode is set to Ach or Bch.
≥
The color temperature display is not guaranteed to indicate an exact value. Use the indicated
value only as a guide.
1
Jog dial
2
WHITE BAL button
ヴユロバ
ヱヶヴラ
ヴユヵ
WHITE BAL
5600K
Ach
HC-X1_GD_DVQP1183ZA_eng.book 63 ページ 2016年11月28日 月曜日 午前11時44分