- 18 -
series
Access lamp [ACCESS]
A
≥
When this unit is accessing the SD card or built-in memory, the access lamp lights up.
1
Open the SD card cover and insert (remove) the SD card into (from) the card
slot
B
.
≥
Face the label side
C
in the direction shown in the illustration and press it straight in as far as it
will go.
≥
Press the centre of the SD card and then pull it straight out.
2
Securely close the SD card cover.
≥
Securely close it until it clicks.
≥
Do not touch the terminals on the back of the SD card.
≥
Do not apply strong shocks, bend, or drop the SD card.
≥
Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the
data stored on the SD card.
≥
When the card access lamp is lit, do not:
j
Remove the SD card
j
Turn the unit off
j
Insert and remove the USB cable
j
Expose the unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/SD card or this unit.
≥
Do not expose the terminals of the SD card to water, dirt or dust.
≥
Do not place SD cards in the following areas:
j
In direct sunlight
j
In very dusty or humid areas
j
Near a heater
j
Locations susceptible to significant difference in temperature (condensation can occur.)
j
Where static electricity or electromagnetic waves occur
≥
To protect SD cards, return them to their cases when you are not using them.
≥
About disposing of or giving away the SD card. (
VX980