- 165 -
Setting up a direct connection to a smartphone
Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (
)
≥
The default setting is [OFF].
Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi
environment.
≥
When [Direct Connection Password] is set to [OFF]
j
Proceed to the following section, “When [Direct Connection Password] is set to [OFF]” in
“Using [Link to Cell] with a direct connection”. (
≥
When [Direct Connection Password] is set to [ON]
If your smartphone is compatible with WPS, refer to “[WPS Connection]”. If not, refer to
“Connecting with QR code”.
[HC-W580PP]/[HC-V380PP]:
Enter SSID and Password or scan QR code to connect.
j
Proceed to the following [WPS Connection]
j
Proceed to the “Connecting with QR code” (
)
j
Proceed to the “Connecting by entering an SSID and Password” (
)
When the Wi-Fi connection is complete, refer to “When [Direct Connection Password] is set to
[ON]” in “Using [Link to Cell] with a direct connection”. (
)
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [WPS Connection].
5
Turn on the Wi-Fi function in the smartphone’s setup menu.
6
Set the smartphone to WPS Mode.
[WPS Connection]
Confirming that the Wi-Fi connection is complete
j
The status indicator of this unit is lit green
j
is displayed on the screen