21
SQT1407
Charging the battery
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥
Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥
Do not use the AC cable with any other equipment as it is designed only for this unit. Also,
do not use the AC cable from other equipment with this unit.
≥
The battery can be charged if the unit is turned on.
≥
It is recommended to charge the battery in a temperature between 10
o
C and 30
o
C.
(The battery temperature should also be the same.)
1
Connect the AC cable to the AC
adaptor and the AC outlet.
≥
Insert the plugs as far as they will go.
2
Connect the AC adaptor to the DC
input terminal [DC IN].
≥
As the charging lamp lights up green,
charging starts. It will turn off when the
charging is completed.
≥
If the charging lamp flashes, refer to page 6.
≥
The DC plug of the AC adaptor, depending on
its angle, may block your view of the charging
lamp. To check the charging lamp status,
adjust the angle of the DC plug.
∫
Connecting to the AC outlet
It is possible to use this unit with power supplied
from the AC outlet by turning on the unit with
the AC adaptor connected.
Even when you use the AC adaptor for
recording images, keep the battery connected.
This allows you to continue the recording even
if a power failure occurs or the AC adaptor is
unplugged from the AC outlet by accident.
≥
Do not use any other AC adaptors except the supplied one.
≥
We recommend using Panasonic batteries (
l
11, 20).
≥
If you use other batteries, we cannot guarantee the quality of this product.
≥
Do not heat or expose to flame.
≥
Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
HC-PV100GCGW-SQT1407_mst.book 21 ページ ２０１６年７月１２日 火曜日 午前１１時１７分
