manualshive.com logo in svg

Panasonic H-H025E, Руководство по обслуживанию

Поделиться
Скачать
Panasonic H-H025E Скачать руководство пользователя страница 8

8

6 Disassembly and Assembly Instructions

6.1.

Outline

Please be disassembly and assembly with reference to the flow chart and illustrations drawings.

Important:

1.  It is recommended dealing with Clean Box, to keep maintaining the dustproof environment.

(Refef to " 

5.2. Clean Box

 " section of this Service Manual for details.)

2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front &

rear), other than necessary cases.

3. Do not touch the surface of the lens glasses with your fingers.
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).

NOTE:

1. When installing the screws, be sure to use the torque driver (RFKZ0456) and tighten the screws with specified torque, men-

tioned on the following.

 

6.2.

Disassembly Flow Chart

Caution

Keep covering the lens unit with Lens caps (front & rear), other than necessary cases.

Содержание H-H025E

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды