file:///C|/U
...emp/Rar$EXa0.829/viewing/SGML_VIEW_DATA/ALL/H-FS1442APP/SVC/DSC1302014CE/doc/DSC1302014CE_04.xml[11/12/2018 11:18:42 AM]
1. Disconnect 1 connector.
4.3 Assembly procedure
Important:
When tightening the screw, use a torque driver (RFKZ0456) by ordering the screwing order with specifed torque described in each step.
4.3.1 Installation of the 1st lens frame unit
1.
Tighten 3 screws (A) in numerical order by using the torque driver with specifed torque.
(Torque Driver : RFKZ0456)
(Torque : 8 ± 0.5N cm)
4.3.2 Installation of the Decoration ring
1. Please insert the pins of the Decoration ring to the hole of the Lens top unit
Use new one, do not use the one which is removed.
Double-stick tape sticks to the Decoration ring of therepair part.
Please remove the old double-stick tape from the Lenstop unit.
2. After installing the Decoration ring, use a soft cloth to press it into place.
