
-11-
SPECIFICATIONS
Pick-up Device :
For NTSC : 1/2-inch Interline transfer CCD image sensor with 768 (H) x 494 (V) pixels
For PAL : 1/2-inch Interline transfer CCD image sensor with 752 (H) x 582 (V) pixels
Horizontal Resolution :
480 lines
Minimum Scene Illumination :
6 lx {0.6 footcandles} (F1.4 with AGC ON more than 30 IRE of Y signal with set up)
Signal to Noise Ratio :
50 dB (Standard condition, Y signal)
Video Output :
1.0 V[P-P]/75
Ω
, composite video, BNC connector x 2)
Scanning System :
2:1 Interlace
Synchronization :
Internal Sync only
White Balance :
Auto Tracing White Balance(ATW)/Auto White Balance Control(AWC)/Manual(MANU)
AGC:
ON/OFF (Approx. 12 dB gain at AGC on position)
ELC:
ON/OFF
Brightness:
MANUAL/AUTO
Light Measurement Area:
FULL/PRESET1/PRESET2/AUTO
Image Orientation:
NORMAL/ROTATE or NORMAL/MIRROR
Freeze:
FREEZE/LIVE
Aperture Compensation:
HIGH/LOW
Function Switches:
Auto White Balance Control Button
White Balance Selection Switch (AWC/ATW/MANU (Manual))
Image Orientation Selection Switch (NORM. (Normal) / ROTA. (Rotate))
Brightness Selection Switch (AUTO/MANU (Manual))
Live/Freeze Button
ELC On/Off Switch
AGC On/Off Switch
2-Memory AWC Mode On/Off Switch
Mirror/Rotate Selection Switch
Light Measurement Area Selection Switch
Aperture Level Selection Switch
Cable Selection Switch
Controls:
White Balance R/B Gain Control
Brightness Control
Power Source :
12 V DC, 450 mA
Camera Cable Length :
GP-CA162/2 Cable 2 m {6.6 ft.}
GP-CA162/38 Cable 3.8 m {12.5 ft.}
Ambient Temperature :
10 °C to 45 °C {50 °F to 113 °F}
Dimensions :
Camera Head :
17 (Diameter) x 35.5 (D) mm {2/3” (Diameter) x 1-1/2”(D)}
Camera Control Unit : 120 (W) x 36 (H) x 157 (D) mm {4-11/16” (W) x 1-7/16” (H) x 6-1/8” (D)}
Weight :
Camera Head :
14
g {
0.035 lbs}
Camera Control Unit : 530
g
{1.2 lbs}
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
STANDARD ACCESSORIES
• Operating Instructions (this Document)
OPTIONAL ACCESSORIES
.
• Camera Cable GP-CA162/2 or GP-CA162/38
. • C-mount Adaptor GP-AD22TA
. • Wide Angle Lens GP-LM3TA or GP-LM7TA
. • Pinhole Lens GP-LP12TA
. • Tele Angle Lens GP-LM15TA or GP-LM24TA