Panasonic GPF14DMON Chassis, Руководство по обслуживанию

Страница: 11 / 169

11
TH-60PF30W
GPF14DMON chassis series have special function and operation setting facility called Option Menu. This Option Menu is
useful for special function required customers. This should be set at the installation stage.
Note:
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID”
adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the “Volume down” button on main unit together with “R” button on the remote control and hold for more than 5 seconds.
The “Shipping“ menu is displayed and the lock is released when it disappears.
Option Menu for GPF14DMON series
Option menus default setting Contents
Weekly Command Timer --- Sets Weekly Command Timer.
Audio input select --- Set up the sound when an image input is selected.
Touch Panel settings --- Set while using Touch Panel (available as an option).
Onscreen display On Enable/Disable to display input mode indication after power on and no signal
indication.
Initial input Off Sets the initial input mode when the power is turned on. Allow input mode selec-
tion while power is on.
Initial VOL level Off Sets the initial volume level when the power is turned on. Allow Volume control
while power is on.
Maximum VOL level Off Sets the maximum volume to desired level. Volume cannot exceed this level.
Input lock Off Fixes the input mode to PC, VIDEO, Component/RGB, HDMI or DVI. Can not
change input mode by input selection key.
Button lock Off Enable/Disable bottom operation buttons (Input, Menu, Enter and/or volume up/
down)
Remocon User level Off Remote key invalidation.
Off: Valid key is all key of remote.
User1: Valid key are only Stand-by (ON/OFF), Input, RECALL, Sound mute On/
Off, and volume adjustment.
User2: Valid key is only Stand-by (ON/OFF).
User3: All keys are null and void
Off-timer function Enable Off-timer operation Enable/Disable.
Initial Power Mode Normal Sets the power mode of the unit for when the power recovers from failure or
after plugging off and in again.
ID select 0
Sets panel ID number when panel is used in
“
Remote ID
”
or
”
Serial ID
”
.
Set value range: 0 - 100.
(Standard value: 0)
Remote ID Off Remote ID function On/Off.
(While the Remote ID on, standard remote function can not control the unit.)
Serial ID Off Serial ID function On/Off
Display size Off Display size function On/Off
Studio W/B Off Studio W/B function On/Off
Studio Gain Off Studio Gain function On/Off
Slot power Off Off: Power is not transmitted to the slot power.
Auto: Power is transmitted to the slot power only when main power is on.
On: Power is transmitted to the slot power when main power is on or in the
standby state.
Power On Screen Delay Off You can set the power-on delay time of the displays to reduce the power load,
when you press to turn on the multiple displays that are set together, for
example, on MULTI DISPLAY system.
Set each display’s setting individually.
Clock Display Off
The clock is displayed at the lower left of the screen when
“
RECALL
“
button is
pressed.
All Aspect Off Aspect mode: default/All aspect mode.
Auto Setup Manual Sets the operational mode of the automatic position adjustment in the POS./
SIZE menu.
Rotate Off Rotate function On/Off
Power On Message (No activity power
off) On Whether to show/hide No activity power off Precautions at the time of power ON
is set.
3D Safety Precautions On 3D Safety Precautions show/hide is set during power ON.
When the setting changes from
“
On
“
to
“
Off
“
, the confi rmation screen is dis-
played as below.
Pressing
“
YES
“
switches the setting.