Panasonic GP-US932CSXE, Руководство по эксплуатации

Страница: 17 / 172

17
Basic operation
This section explains how to display the SETUP menu on the monitor connected for adjustment and how to perform the basic
operations in the SETUP menu.
Important:
The following functions are not available when the camera head is not connected: •
AWC startup for white balance •
MATRIX •
ELECTRIC ZOOM •
FREEZE •
FLIP •
MIRROR •
Top screen of SETUP menu
** SET UP ** P1
CAMERA ID *OFF
ELC *OFF
SHUTTER OFF
GAIN OFF
SENS UP OFF
BINNING OFF
OUTPUT SEL RGB
HDMI OUTPUT YPbPr(422)
END
** SET UP ** P2
SCENE FILE *FILE1
WHITE BAL AWC
BLACK BAL *MANU
SYNC INT
END
** SET UP ** P3
ELECTRIC ZOOM ON
FREEZE ON
FLIP ENABLE OFF
MIRROR ENABLE OFF
STATUS DISPLAY OFF
SD ASPECT SIDE CUT
END
Step 1
Hold down the [FREEZE MENU ] button for 2 seconds or
more.
The top screen of the SETUP menu appears.
→
Step 2
The SETUP menu consists of 3 pages of contents.
To turn a page, move the cursor to “P1” or “P2”, “P3” and
press the [
e
] or [
f
] button. In addition, when the cursor is
moved to “P1” and the [
e
] button is pressed or when the
cursor is moved to “P3” and the [
f
] button is pressed, the
“SCENE FILE” screen appears.
Note:
The cursor is a blinking part. •
The cursor is displayed with halftone in these instruc-
tions.
Step 3
Perform the settings for each item.
Selection of setting item: •
Press the [
g
] button or [
h
] button to move the cursor.
Change of settings: •
Press the [
e
] button or [
f
] button.
Display of advanced setup screen: •
Press the [SEL] button when “*” is attached to the target
item.
Return to previous setup screen:
•
Move the cursor to “RET” and press the [SEL] button.
Step 4
To return to the camera image screen after saving the set-
ting contents, move the cursor to “END” and press the
[SEL] button.
The setting contents can be saved even if the power of the
CCU is turned off.
Default restoring
To restore the setting contents with level indicator in the SETUP menu or SEL menu to each default, hold down the [ •
e
] and
[
f
] buttons simultaneously for 2 seconds or more.
To restore all the setting contents in the SETUP menu and SEL menu to default, move the cursor to “END” in the bottom •
line and hold down the [FREEZE MENU ] and [
h
] buttons simultaneously for 2 seconds or more.