– 6 –
For further information, refer to the
4
(Status) indicator section in the Operating
Instructions.
Amber
On
L
The base unit’s IP address may conflict with the IP
addresses of other devices on your local network if
you have set the static IP address. We recommend
using the automatic setup (default):
1.
K
i
{#}{
5
}{
0
}{
0
}
2.
{V}{^}
: “
On
”
i
M
i
{i}
Flashing
L
The base unit is registering with the
A
service.
Please wait.
L
If the
4
indicator continues flashing:
– If you have set the static address, we recommend
using the automatic setup (default):
1.
K
i
{#}{
5
}{
0
}{
0
}
2.
{V}{^}
: “
On
”
i
M
i
{i}
– Many installation issues can be resolved by
resetting all the equipment. First, shut down your
modem, router, base unit, and computer. Then
turn the devices back on one at a time in this
order: modem, router, base unit, computer.
– If you cannot access Internet Web pages using
your computer, check to see if your Internet
service provider is having connection issues in
your area.
– For more troubleshooting help, visit www.joip.com
or contact the
A
service provider.
OFF
—
L
A
internet calls are not available. Check the
following:
– The base unit’s AC adaptor is connected.
– Set up for
A
use (page 2).
– The Ethernet cable is connected.
– Your network devices (hub, router, etc.) are turned
on. Check the LEDs for the link status of the
devices.
Quick troubleshooting
4
(Status) indicator
Status
Cause/solution
Colour
Light pattern
BB-GT15xxE_QG(e).fm Page 6 Sunday, July 1, 2007 10:43 AM
