Panasonic FP-E Скачать руководство пользователя страница 310 | Manualshive

Страница: 310 / 1334

Panasonic FP-E Скачать руководство пользователя страница 310

High

−

level Instructions

3

−

46

Description

The program for the file name stored in the area specified by S is read from the IC memory card, and is
substituted for the program currently being executed.
Subsequent operation is carried out based on the program which was read.

Precautions when changing programs

Programs are changed when the

ED

instruction is executed. At that point, the mode changes automatically

from the RUN mode to the PROG. mode.
All output goes off.
The contents of memory areas not specified as hold

−

type are cleared.

When a program is read, the system registers are rewritten at the same time. The same system register
settings as those of the specified program should always be used, including the I/O map, remote I/O map, and
others.

Flag conditions

・

Error flag (R9007): Turns on and stays on when:

・

Error flag (R9008): Turns on for an instant when:

−

No IC card is installed in the CPU.

−

The IC card access enable switch is set to off (disabled).

−

No DOS formatted area is found on the IC card.

−

The specified file name does not exist on the IC card.

−

The specified file is not a program file for the FP2SH/FP10SH.

−

The file is damaged.

−

A file name which cannot be used is specified.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

«
...
308
309
310
311
312
...
»

Содержание FP-E























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов