3-13
Preventive
Maintenance
(16) Removal of the tractor belt
1) Remove the external covers. (front/rear)
2) Remove the lower left panel. (front/rear)
3) Remove the harness connector of the left
panel.
4) Remove the belt motor unit.
5) Remove the lower guide support plate for
the invert paper exit. (4 screws)
6) Remove the tension spring from the shaft.
7) Remove the knob for paper jam removal.
(1 screws)
8) Remove the tractor belts. (x 2)
NOTE: When the belt is re-installed, install
the belt so that the belt tooth just
under the plastic hook is aligned with
the slit on the pulley.
5
5
5
5
6
7
8
8
(17) Removal of the staple unit
1) Open the staple cover.
2) Remove the staple connector. (x 1)
3) Remove the staple unit.
2
3
