background image

4-32

4.2 Self-diagnostics/Machine Malfunctions

The self-diagnostic functions detect troubles in important components of the copier.

When any trouble occurs, the copier is stopped.

1.

User error

NOTE: XXXX will appear in message display.

Error
code

Message

Item

See page

Uo

INSERT KEY

Key counter failure (option) or

4-31

or

Access code number was not

INPUT IDENTIFICATION

input

CODE XXX

U1

CLOSE FRONT PANEL

Front cover failure

4-31

U4

CLOSE SORTER

Sorter failure (option)

4-31

Sorter won't close securely.

U5

CLOSE DUPLEX UNIT

Duplex unit failure

4-31

U6

CLOSE RIGHT SIDE PANEL

Copier paper feed cover failure

4-32

U7

CLOSE RIGHT SIDE PANEL

System console (option) paper

4-32

feed cover failure

U10

CLOSE ADF

ADF (option) failure

4-32

U11

CLEAR SORTER BINS

Sorter copy paper removal

4-32

NOTE: When clearing U11, all

paper is removed from bins.

U12

ADD STAPLES

Sorter with stapler

4-33

U13

ADD TONER

Toner level detection

4-33

U14

REPLACE WASTE TONER

Waste toner bottle full

4-33

BOTTLE

U16

INSTALL DEVELOPER UNIT

Developer unit is not installed

4-33

U17

Sorter transport cover failure

4-33

U18

Copy usage is upper limited.

4-33

Содержание FP-7742

































































































































Отзывы: