Panasonic FL360 - DMW - Hot-shoe clip-on Flash, Руководство по эксплуатации

Страница: 19 / 196

19
VQT1B11
Press the [MODE] button, and select
the flash mode. (P17)
≥
The flash working range is shown
on the display panel in line with the
settings of the digital camera.
A : Flash working range
1 Check that the distance to
the subject is within the
flash working range.
≥
If the subject is outside the range,
adjust the aperture of the lens or
change the distance to the subject.
≥
The flash working range changes
depending on the type and
settings (ISO sensitivity, aperture
and focal length) of the digital
camera used.
2 Press the shutter button
all the way down, and take
the picture.
3 Check that the [AUTO
CHECK] lamp is flashing.
≥
If the [AUTO CHECK] lamp
continues to flash for about
5 seconds, it means that the unit
has fired successfully. If it does not
flash, the unit has not fired
successfully. Check the settings
on the unit and the digital camera
and then take the picture again.
[TTL AUTO]
A
AUTO CHECK
VQT1B11.book 19 ページ ２００６年８月３１日 木曜日 午後４時３６分