Make sure to disconnect the power plug before cleaning the product.
(Otherwise, the product might operate with the possibility of electric
shock or injury.
Hook the left and right sides of the front panel left with two hands, followed by pulling it out to remove
the panel and remove the fore-filter.
Use clean water, neutral detergent or dust cleaner for cleaning, followed by drying and reinstalling it in
the machine body.
The air volume at the air outlet becomes smaller and the sound becomes louder. Please check if it is
time to clean or replace the filter. Generally, it should be cleaned once every 1 month approximately.
Due to different environment for place of use, the service life of the HEPA dust collection filter also
differs. Generally, it should be replaced once every 2 years approximately.
For the approach of removing the fore-filter,
please refer to Cleaning of Fore-filter
mentioned above.
Reach in the lower edge of the front panel
and pull forward to remove the front panel.
As a reminder, use dust cleaning to suck
dust for the HEPA dust collection filter, and
never wash it with water in order not to lose
function of the filter.
9
HEPA dust collection filter for replacement (optional) : F-ZEHC15Z Please purchase it from your
nearest service station or dealer.
Time for cleaning and replacement of filter
Method for cleaning and replacement of filter
Remove the front panel, fore-filter.
After replacing the filter, in the power-on state,
please long press the Timer/Filter reset (press
3 sec) key for 3 seconds until a long tone
sounds, and the replacement time for the filter
is recounted.
Simply clean the surface of the filter with a dust
cleaner.
Please remove the filter from the plastic bag as
it is just purchased or replaced.
Never use water washing and
brush for cleaning.
Replacement or cleaning of the filter is
determined according to the dirty conditions
on the surface of the filter.
Install fore-filter, front panel, plug in the
power plug.
In renewal
In cleaning
Remove the fore-filter prior to removal of the
HEPA dust collection filter.
Take the filter out of the machine body.
Cleaning of Fore-filter
(every 1~2 months.)
Cleaning and replacement of filter
(every 1 month.)
Remind
Dirt on the machine body
may be wiped by using a
cloth dampened with
water or a neutral
detergent.
For dust in the air suction
vent, please wipe it with a
dry cloth or clear it with a
dust cleaner.
Cleaning of machine body.
(every 1~2 months.)
As a reminder, it is recommended to perform cleaning and maintenance.
Notice
Method of Cleaning and Maintenance
Fore-filter
(every 1~2 months.)
Sweep of the air suction vent.
