6
Do not screw Lower and Upper
Canopy Screws /
切勿鎖緊下罩蓋和上罩蓋的螺絲
Pipe /
導管
Upper Canopy (with logo brand) /
上罩蓋 (印有品牌標誌)
(i)
(ii)
Pipe /
導管
Power Cord (from power supply)
電纜（自電源）
Ceiling /
天花板
Upper Canopy /
上罩蓋
Lower Canopy /
下罩蓋
Lower Canopy /
下罩蓋
2
2
Insert Lower Canopy to the Pipe. Then insert Upper Canopy (with logo brand) to the Pipe.
將下罩蓋嵌入導管。然後將上罩蓋（印有品牌標誌）嵌入導管。
Check Point After Installation /
安裝後的重點檢查
1. Insert the Lower and Upper Canopy to Pipe and the screw is not tightened. /
將下罩蓋和上罩蓋嵌入導管，並且螺絲沒被鎖緊。
2. Upper Canopy (with logo brand) is on top of Lower Canopy (no logo brand). /
上罩蓋 (印有品牌標誌) 是在下罩蓋 (無品牌標誌)的頂部 。
Check /
檢查
B)
Assemble Pipe To Motor Assembly /
組裝導管至發動機組件
1
1
Pull the power cord (from power supply) and insert into the Pipe hole as shown.
拉電纜（自電源）並如圖所示將之插入導管孔。
F-48MS2_EN_CT.indd 6
F-48MS2_EN_CT.indd 6
1/27/2015 9:05:00 AM
1/27/2015 9:05:00 AM
