- 18 -
Attaching Socket
• Remove the socket’s rubber ring and pin.
rubber ring
pin
groove
1
Attach the socket to the tool.
2
Insert the pin. (Taking care to align the pin
holes on the socket and tool.)
3
Attach the rubber ring by sliding it into place
over the groove.
NOTE:
Be sure to attach the rubber ring to prevent
the pin from falling out.
Removing Socket
1
Remove the rubber ring.
2
Remove the pin.
3
Remove the socket from the tool.
NOTE:
Keep the temperature of the tool above
the freezing point (0°C/3°F) when
attaching sockets to or detaching them
from the square drive on the tool. Do not
use excessive force when attaching or
detaching sockets.
Attaching or Removing Bat
tery Pack
1. To connect the battery pack:
Line up the alignment marks and attach
the battery pack.
• Slide the battery pack until it locks into
position.
Alignment
marks
. To remove the battery pack:
Push up on the button from the front to re-
lease the battery pack.
Button
IV
.
OPERATION
[Main Body]
Switch and Forward/Reverse
Lever Operation
Forward
Reverse
Switch lock
CAUTION:
To prevent damage, do not operate
Forward/Reverse lever until the bit comes
to a complete stop.
