Panasonic EY7411 - CORDLESS DRILL & DRIVER, Руководство по обслуживанию

Страница: 6 / 11

6
4 Disassembly and Assembly Instructions
4.1. Disassembly Instructions
Ref. No. 1A Procedure 1A Removal of the grip.
1. Remove both sides of the grip fastening clip by sliding it outward.
2. Remove one grip fastening screw.
3. To separate the grip housing, insert the battery pack into the grip
about one third. Slightly shake the battery until the end of grip will be
opened.
4. Separate the grip A and B with holding the control panel by some-
thing like a fine stick.
Ref. No. 1B Procedure 1A
→
1B Removal of the housing.
1. Remove 4 screws from the housing.
2. Separate the housing A and B.
3. Remove the clutch handle, adjusting screw, clutch spring and
clutch plate.