Panasonic EY37A2, Руководство по эксплуатации

Страница: 13 / 140

- 13 -
EN
To disable the snooze function, rotate the
Tuning control until “OFF” is displayed.
Sleep timer ––––––––––––––––––––– SLP
The radio can be set to turn off automatically
after a preset time has elapsed. The Sleep
Timer setting can be adjusted between OFF,
15, 30, 45, 60 and 90 minutes.
1. Press and hold the Tuning control to enter
the advanced setting menu.
2. Rotate the Tuning control until “SLP” shows
on the display. Press the Tuning control to
enter the setting.
3. Rotate the Tuning control to cycle through
the option of OFF, 15, 30, 45, 60 or 90.
Stop when the desired sleep timer setting
appears on the display. The setting will be
saved and the LCD will return to normal
display.
4. The radio will switch off automatically after
the preset Sleep Timer has elapsed. The
Sleep Timer icon ( ) will show on the
display indicating an active Sleep Timer.
5. To cancel the Sleep Timer function before
the preset time has elapsed, simply press
and hold the Power button to turn the unit
off manually. To cancel the function when
countdown is progressing, go to sleep timer
setting menu and select “OFF”.
Tone control function –––––––––––– TON
The sound of your sound system can be
adjusted to suit your personal taste for the
material that you are listening to. The radio
has 5 preset tone control. Alternatively, you
may set the treble and bass levels to your
own preferences.
1. Press the Volume control to enter EQ menu.
2. Rotate the Volume control until “TON” is
shown on the display. Press the Volume
control to enter the setup menu.
3. Rotate the Volume control to cycle through
the 6 modes below until the desired mode is
displayed. Then press the Volume control to
confirm the setting.
a. TN 1-Flat
b. TN 2- Heavy
c. TN 3- Soft
d. TN 4- Clear
e. TN 5- Vocal
4. To revert back to the upper level menu,
rotate the Volume control until is shown
on the display. Then press the Volume
control again to return to the upper level
menu.
Set my own EQ ––––––––––––––––– BAS
If you find the preset equalizer functions
not to your liking, you may set up a custom
treble and bass as following:
1. Press the Volume control to enter EQ menu.
2. Rotate the Volume control until “BAS” is
shown on the display. Press the Volume
control to enter the setup menu.
3. Rotate the Volume control to adjust the bass
level (between -5 and +3). The sound will
change as you adjust the level. Press the
Volume control again to confirm the setting.
4. Rotate the Volume control until “TRE” is
shown on the display. Press the Volume
control to enter the setup menu.
5. Rotate the Volume control to adjust the treble
level (between -5 and +3). The sound will
change as you adjust the level. Press the
Volume control again to confirm the setting.
Setting the operation sound–––––––BZR
You can turn on or off the operation sound of
the radio.
1. Press and hold the Tuning control to enter
the menu setting of the current mode.
2. Rotate the Tuning control until “BZR”
appears on the display and press the Tuning
control to enter the setting.
3. Rotate the Tuning control to choose the
required selection and press the Tuning
control to confirm the setting.
Auxiliary input socket
A 3.5mm stereo Auxiliary Input sockets is
provided at the left side of the radio.
1. Connect an external audio source (for
example, smartphone, MP3 or CD player) to
the Auxiliary Input socket.
2. Press the Source button until AUX IN is
displayed.
3. Adjust the volume setting on your
smartphone, MP3 or CD player to ensure an
adequate signal level from the player, and
then use the Volume control on the radio as
needed for comfortable listening.
Headphone socket
A 3.5mm Headphone Socket located on
the right hand side of the radio is provided
for use with headphones. Inserting a plug
automatically mutes the internal loudspeaker.
Please be aware that the sensitivity of
headphones can vary widely. We therefore
recommend setting volume to a low level
before connecting headphones to the radio.
EY37A2.indb 13 2015-2-13 9:53:17