ENGLISH
- 5
Precautions for Use (continued)
z
Use this product in an environment with temperatures from -10°C (14°F) to 40°C (104°F), humidity of 80% or
less, and no condensation.
z
This product does not support affixing multiple of this product or other films with one on top of another.
Attention
z
Be sure to ask a qualified technician to perform the work to affix this product to a glass surface.
■
Storage
z
Store this product away from direct sunlight in a dark place with temperatures from -10°C (14°F) to 40°C (104°F),
humidity of 80% or less, and no condensation.
We recommend using this product by the “Best if used by” date indicated on the product’s packaging, as the
adhesives used for the product may deteriorate resulting in decreased bonding strength.
z
Store an unpacked film screen in a flat state without any bending.
If the film screen is rolled or bent, the release film may partially peel off and the adhesive quality may change,
causing uneven display and transparency or an installation problem due adhesive deterioration.
■
During Use
z
Hard coat treatment has been applied to the film screen front surface, but please note that the front surface
may still be scratched if it is scraped with a hard object.
z
Please note that there is a risk of deterioration if volatile substances such as pesticides, benzine, and thinner
come into contact with the product.
z
Do not affix adhesive tape to the film screen surface, or write on it with a permanent marker, etc. There is a risk
of deterioration.
z
Do not perform printing and other after-processing because doing so may cause deterioration in performance
and quality.
■
Cleaning and Maintenance
z
Wiping with a dry cloth is strictly prohibited. Wipe off any dirt on the film screen with a soft cloth that has been
dampened in water.
Strong rubbing may cause damage. If dirt is difficult to remove, use neutral detergent that has been diluted with
water.
■
Removal
z
When removing the film screen affixed to glass, peel it off while taking care not to apply a load on the glass.
z
If adhesive remains on the glass, spay water or soapy water on the glass and then remove the adhesive using
a scraper or other tool.
* Ask a qualified technician to perform the removal work.
■
Disposal
z
When disposing of the product, ask your local authorities or dealer for correct methods of disposal.
