Panasonic ET-RPS100G Скачать руководство пользователя страница 7

ENGLISH - 7

Read this first!

WARNING:

 

r

ON USE/INSTALLATION

Do not set up the device in humid or dusty places or in places where the device may come into contact 

with oily smoke or steam, ex. a bathroom.

Using the device under such conditions will result in fire or electrical shock.

Never attempt to remodel or disassemble the device.

High voltages can cause fire or electric shocks.

 

f

For any inspection, adjustment and repair work, please contact an Authorized Service Center.

Do not allow metal objects, flammable objects, or liquids to enter inside of the device. Do not allow the 

device to get wet.

Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the device.

 

f

Do not place containers of liquid or metal objects near the device.

 

f

If liquid enters inside of the device, consult your dealer.

 

f

Particular attention must be paid to children.

CAUTION:

 

r

POWER

When disconnecting the power cord, be sure to hold the power plug and power connector.

If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks 

will result.

When not using the device for an extended period of time, disconnect the power plug from the wall 

outlet.

Failure to do so may result in fire or electric shock.

Disconnect the power plug from the wall outlet before carrying out any cleaning of the device.

Failure to do so may result in electric shock.

Be sure to turn off the power and disconnect the power plug from the wall outlet before carrying out 

servicing work such as installing to the Multi Window Processor or removing.

Failure to do so may result in electric shock.

If both POWER SUPPLY units are installed, be sure to turn off both of the power before carrying out 

servicing work.

Failure to do so may result in electric shock.

 

r

ON USE/INSTALLATION

Do not place the device in extremely hot locations.

Doing so will cause the outer casing or internal components to deteriorate, or result in fire.

 

f

Take particular care in locations exposed to direct sunlight or near stoves.

Ask a qualified technician or your dealer when installing or removing this product.

Failure to do so may result in electric shock.

Содержание ET-RPS100G













Отзывы: