ENGLISH - 7
Installation
After checking the height, width and structure of the installation location while referring to the “Dimensional rela-
tionship diagram” in the “Standard installation dimensions” (pages 5-6) and “Dimensional relationship” in the Ap-
pendix, determine the appropriate positions for setting up the screen and installing the projector.
Setting up the screen
Set up the screen according to the specified method in a position which takes into account the projection distance
and angle and the type of screen being used.
Screws tightening torques
M4………1.25 ± 0.2 N • m
z
When tightening the screws, use a torque screwdriver or a hexagonal torque wrench to tighten the screws to
the specified tightening torques. Do not use electric screwdrivers or impact screwdrivers.
Installing the bracket to the projector
Install the projector mount bracket to the projector (sold separately) by following the procedure below.
1 Place the projector upside down on top of a soft
cloth.
2 Retract the adjustable feet.
z
Press the adjustable feet lock latch and release
them at shortest length of the adjustable feet.
Or rotate the adjustable feet in clockwise to
retract them.
3 Secure the projector mount bracket to the bot-
tom of the projector using the 4 supplied captive
washer screws (M4 × 10) as illustrated on the
left.
Adjustable feet
Adjustable foot
lock latch
Adjustable foot
lock latch
Projector mount bracket
Screw, captive
washer (M4
× 10
)
