8 - ENGLISH
Installation (continued)
Suspending the projector
1 Loosen the bracket fixing screw of the attachment
plate and the safety fixing screw.
2 Insert the hooks of the adjustable bracket unit
into the three holes in the attachment plate, then
rotate the projector in the direction of the arrow.
Attention
z
Loosen the bracket fixing screw and the safety
fixing screw as shown in the figure on the left be-
fore inserting the hooks of the adjustable bracket
unit.
z
Hold the projector firmly until inserting the hooks
of adjustable bracket unit into the holes in the at-
tachment plate and the rotating the projector are
finished.
WARNING
■
Mounting and installation must be
carried out by two or more persons.
3 Temporarily tighten the bracket fixing screw.
Attention
z
After the installation angle adjustment on page
9, tighten the bracket fixing screw securely with
fingers.
4 Use a torque screwdriver to tighten the safety fix-
ing screw.
Attachment plate
Bracket fixing screw
Hooks
Hooks
Bracket fixing screw
Safety fixing
screw (M4)
(This figure is
viewed from
below.)
Hooks
Rear of projector
Safety fixing
screw (M4)
Bracket fixing
screw
