Installing the Interface Board
ENGLISH - 9
How to remove the Interface Board
Fig. 1
Handle
1) Remove the Interface Board. (Fig. 1)
f
Remove the four screws fixing the Interface Board by rotating
counterclockwise with a Phillips screwdriver. The removed screws are
used to fix the slot cover.
f
Hold the handle of the Interface Board and remove it slowly.
2) Attach the slot cover.
f
Attach the stored slot cover to the blank slot, and tighten and fix with
the four screws removed in Step
1)
.
Attention
f
Always attach the slot cover on the blank slot.
f
Store the removed Interface Board inside an antistatic bag.
ET-MDNDP10C_DPQX1381ZA_E.indb 9
2019/03/15 9:53:11
