6
Plug the mains lead to the mains socket.
7
Press the POWER button so that a picture is projected onto the screen.
8
Press the MENU button to display the menu screen, and then press
the ▲ or ▼ button to select the “OPTION” menu.
9
Press the ENTER button,
a
nd then press the ▲ or ▼
button to select
“LAM
P
RUNTIME”.
10
Press and hold the ENTE
R button for approximately 3 seconds.
●
The “LAMP TIME RESET” screen will be displayed.
11
Press the POWER button to turn off the power.
●
Disconnect the mains lead after the POWER button on the projector
illuminates red.
12
This will reset the cumulative usage time for the lamp unit to “0”.
13
Replace the air filter with the new filter which is supplied as an
accessory, while referring to the replacement procedure which
appears in the Operating Instructions for the LCD projecto
r.
NOTE:
●
If “DIRECT POWER ON” in the “OPTION” menu has been set to “ON”,
projection will start after the mains lead is connected.
NOTE:
●
If you press any button other than the POWER button, the “LAMP
RUNTIME RESET” screen will be cleared and the cumulative usage
time for the lamp will not be reset. Repeat the procedure from step .
Accessory
•
Air filter: 1
8
Printed in Japan
Web Site : https://panasonic.net/cns/projector/