18 - ENGLISH
Installation (continued)
Changing the orientation of the main unit of the projector.
This section describes changing the orientation of the main unit of the projector to make the mounting work of the
projector mount bracket easier to do.
Rotating
fi
screw
1) Place the projector on a cloth or the like that
has been laid on a
fl
at surface.
2) Loosen the
fi
xing screw.
Loosen the rotating
fi
xing screw of the projector
with the 7/64” Allen wrench supplied with the
projector.
Shaft holder
Main unit
3) Change the orientation of the main unit.
Loosening the rotating
fi
xing screw enables
rotation of the shaft holder so that the
orientation of the main unit can be changed.
4) Tighten the
fi
xing screw.
Tighten the rotating
fi
xing screw with the 7/64” Allen wrench supplied with the projector to prevent the main
unit moving during the mounting work.
Note
The rotating
fi
xing screw is a hexagon socket head screw (M6). Take care because it will come out of the
projector if loosened too much.
ET-JPC100BWU(DPQX1104ZA)̲E.indd 18
ET-JPC100BWU(DPQX1104ZA)̲E.indd 18
2016/06/08 13:50:57
2016/06/08 13:50:57
