ENGLISH
-6
EN
G
LI
SH
Adjusting the focus
After setting up the projector, turn on the power, and then project the image on the screen. Adjust the position of
the projector and the projected image.
z
■
ET-ELW03
1)
Loosen the focus lock screw.
2)
Rotate the lens to obtain the proper
focus on the center area of the screen.
z
z
When the distance between the projector and
the screen is 1 m, set the position of the focus
lock screw to the mark (yellow) of the lens.
3)
Tighten the focus lock screw.
4)
When proper focus is not observed
on outer area of the screen, proceed
further adjustments.
(i)
Turn the focus lock ring counterclockwise.
(ii) Rotate the lens to adjust the focus on outer area
of the screen.
(iii)
Turn the focus lock ring clockwise.
• If proper focus is not observed over the entire
screen, repeat steps from the first.
Focus lock screw
Focus lock ring
mark
z
■
ET-ELT03
1)
Rotate (i) to adjust the zoom.
2)
Rotate (ii) to obtain the proper focus
on the center area of the screen.
(i)
(ii)
