Panasonic ET-DLE030, Инструкция по эксплуатации

Страница: 4 / 22

4-ENGLISH
Before replacing the projection lens
Return the projection lens to the home position before replacing or removing it.
For details on how to return the lens to the home position, refer to the operating instructions of the projector.
Attention
z
Make sure that the projector power supply is switched off before attaching or detaching the projection lens.
z
After removing the projection lens, store it safely away from vibration or impacts.
z
Do not touch the electric contact points of the projection lens with your fingers. Dust and dirt on the contacts
may cause contact malfunctions.
z
Before attaching the Fixed-focus lens, remove the protective film from the light projecting surface and the lens
cap from the lens.
Lens surface
Light
projecting
surface
Lens cap
Protective film
z
Be sure not to touch the light projecting surface or the surface of the lens. Any fingerprints or smudges on
these surfaces will be magnified and lower the quality of the image displayed on the screen.
z
The light projecting surface and lens are made of glass. The lens could be damaged if brought into contact
with or rubbed against hard objects. Handle the lens carefully.
z
Use a clean, soft and dry cloth to wipe away any dirt or dust that has adhered to the light projecting surface or
lens. Do not use fluffy cloths containing oil, water or dust for cleaning.
z
When the Fixed-focus lens is removed from the projector, place it with the light projecting surface facing
downwards.
Attaching the Lens / Detaching the Lens
Before Use

Supported projectors
PT-DZ870 / PT-DW830 / PT-DX100 / PT-DZ770 / PT-DW740 / PT-DX810 / PT-DZ680 / PT-DW640 / PT-DX610 /
PT-DW730 / PT-DX800 / PT-DZ6710 / PT-DZ6700 / PT-DW6300 / PT-D6000 / PT-D5000
Note
z
Models other than the above may also be supported. Refer to the operating instructions of the projector you are using.
z
In this document, the alphabet letters at the end of the projector part numbers are omitted.

Supplied Accessories
Make sure that the following has been provided. Numbers enclosed in < > show the number of accessories.
Lens cap <1> Lens shift gauge <1>
■ 付属品
Make sure that the following has been provided. Numbers enclosed in < > show the number of accessories.
Lens cap
<1>
Lens shift gauge
<1>
(The product is
delivered with a lens
cap attached.)