ENGLISH-7
Preparation (continued)
2) Loosen the mounting screws in
four places on the attachment
mount bracket.
z
Provide a gap of about 2 mm
between the attachment mount
bracket and base bracket.
3) Pull together the tabs at the top
and bottom of the attachment
mount bracket and align the
lens fixed attachment with the
circular recesses in the front
panel of the projector.
4) Push the tabs of the attachment
mount bracket against the
recesses in the base bracket
and then tighten the mounting
screws in four places.
Attention
z
Push the tabs so that they are parallel
against the recesses.
Mounting
screws
Mounting
screws
Mounting
screws
Mounting
screws
Tabs
Tabs
Содержание ET-DLE020C
Страница 30: ...6 附表 Appendix MEMO ...
Страница 31: ...7 附表 Appendix MEMO ...
Страница 32: ... https panasonic cn 4 日本福冈县福冈市博多区美野岛四丁目1番62号 2022 松下互联株式会社 2022版权所有 SS0919AM1042 PS 日本印刷 ...