3
Assembled bracket with projectors
Bracket components
This bracket is exclusively for the installation of dual DLP
TM
projectors. The bracket is made up of the following
components. Before assembling the bracket, confirm that all components have been provided.
■
Structural components
Base frame 1
Left frame, right frame 1 each
Gas springs 2
Upper frame 1
Left guard frame, right guard frame 1 each
Use the following to mount the lower
projector in the base frame.
Flat washers (M10) 4
Spring washers (M10) 4
Hex bolts (M10) 4
For mounting the lower projector.
Attaches to the base frame, then the upper frame is
attached.
Attaches to the upper frame
and left and right frames to
support the weight of the
upper projector.
For mounting the upper projector. Then the frame and upper projector are
attached to the left and right frames.
After the upper and lower projectors are mounted,
attaches to the left and right frames.
Use the following to attach the left and right frames to
the base frame.
Built-in allen hex socket bolts (M6x20) 6
Allen hex socket bolts (M8x50) 6
Use the following to install
the gas springs.
Plate bolts (M5x10) 8
Use the following to attach the left and right guard
frames to the left and right frames.
Flat washers (M6) 14
Spring washers (M6) 14
Allen hex socket bolts (M6x50) 14
Use the following to attach
the upperr frame to the
upper projector.
Use the following to attach the upper
frame to the left and right frames.
Special-purpose axes 2
Washers 2
Hex nuts (M12) 2
Spring washers (M12) 2
Flat washers (M12) 2
Allen hex socket bolts (M10) 2
Spring washers (M10) 2
Flat washers (M10) 2
Adjustment bolts (M10) 4
Washers (A) 4
Washers (B) 3
Washers (C) 1
Mounting nut (M10) 4
Hex nuts (M10) 4
Snap pins 4
Upper projector
Lower projector