6-ENGLISH
Lens calibration
Perform lens calibration after attaching the lens.
The illustrations in this procedure depict
use of the ET-D3QW300 as an example.
1) Press the <MENU> button.
2)
Use the ▲ and ▼ buttons to
select [PROJECTOR SETUP],
and press the <ENTER>
button.
z
The [PROJECTOR SETUP] screen
appears.
3)
Use the ▲ and ▼ buttons to
select [LENS], and press the
<ENTER> button.
z
The [LENS] screen appears.
4)
Use the ▲ and ▼ buttons to
select [LENS CALIBRATION],
and press the <ENTER>
button.
z
The [LENS CALIBRATION] screen
appears.
5)
Use the ▲ and ▼ buttons to
select [SHIFT/FOCUS/ZOOM],
and press the <ENTER>
button.
z
The confirmation screen appears.
6) Use the
and
buttons to
select [OK], and press the
<ENTER> button.
z
Lens calibration starts.
z
The projection lens moves to the
home position after adjustment range
calibration is complete.
1/2
PROJECTOR SETUP
PROJECTOR ID
ALL
PROJECTION METHOD
LENS
OPERATION SETTING
NORMAL
LIGHT OUTPUT
100.0%
BRIGHTNESS CONTROL
AUTO
NO SIGNAL SETTING
LAST MEMORY
LAST USED
INITIAL STARTUP
STARTUP INPUT SELECT
OFF
DATE AND TIME
SCHEDULE
MULTI PROJECTOR SYNC
MENU SELECT
ENTER
SUB MENU
SUB MENU
MENU SELECT
ENTER
LENS
LENS INFORMATION SETTING
LENS MEMORY
LENS HOME POSITION
ACTIVE FOCUS OPTIMIZER
LENS CALIBRATION
EXECUTE
MENU SELECT
ENTER
LENS CALIBRATION : ET-D3QW300
SHIFT/FOCUS/ZOOM
SHIFT/FOCUS
ZOOM
LENS CALIBRATION : ET-D3QW300
OK
Proceed LENS CALIBRATION,
and return to HOME POSITION.
EXECUTE
CHANGE
ENTER
CANCEL
Note
z
If lens calibration is not performed, the available zoom range will be narrowed.
Preparation (continued)
