ENGLISH-7
Preparation (continued)
Lens calibration
Perform lens calibration after attaching the lens.
The illustrations in this procedure depict
use of the ET-D3LEW10C as an example.
1) Press the <
菜单
> button.
2)
Use the ▲ and ▼ buttons to
select [PROJECTOR SETUP],
and press the <
执行
> button.
z
The [PROJECTOR SETUP] screen
appears.
3)
Use the ▲ and ▼ buttons to
select [LENS], and press the
<
执行
> button.
z
The [LENS] screen appears.
4)
Use the ▲ and ▼ buttons to
select [LENS CALIBRATION],
and press the <
执行
> button.
z
The [LENS CALIBRATION] screen
appears.
5)
Use the ▲ and ▼ buttons to
select [SHIFT/FOCUS/ZOOM],
and press the <
执行
> button.
z
The confirmation screen appears.
6) Use the
and
buttons to
select [OK], and press the <
执
行
> button.
z
Lens calibration starts.
z
The projection lens moves to the
home position after adjustment range
calibration is complete.
1/2
PROJECTOR SETUP
PROJECTOR ID
ALL
PROJECTION METHOD
LENS
OPERATION SETTING
NORMAL
LIGHT OUTPUT
100.0%
BRIGHTNESS CONTROL
AUTO
STANDBY MODE
NORMAL
NO SIGNAL SHUT-OFF
DISABLE
NO SIGNAL LIGHTS-OUT
DISABLE
INITIAL STARTUP
LAST MEMORY
STARTUP INPUT SELECT
LAST USED
DATE AND TIME
SUB MENU
MENU SELECT
执行
SUB MENU
MENU SELECT
LENS
LENS TYPE
ET-D3LEW10C
LENS INFORMATION SETTING
LENS MEMORY
LENS HOME POSITION
ACTIVE FOCUS OPTIMIZER
LENS CALIBRATION
执行
EXECUTE
MENU SELECT
LENS CALIBRATION : ET-D3LEW10C
SHIFT/FOCUS/ZOOM
SHIFT/FOCUS
ZOOM
执行
LENS CALIBRATION : ET-D3LEW10C
OK
Proceed LENS CALIBRATION,
and return to HOME POSITION.
EXECUTE
CHANGE
CANCEL
执行
Note
z
If lens calibration is not performed, the available zoom range will be narrowed.
