Panasonic ET-D3LEU100C, Руководство по эксплуатации

Страница: 7 / 24

ENGLISH-7
Preparation (continued)
Lens calibration
Perform lens calibration after attaching the lens.
The lens calibration procedure differs depending on the projector you are using and the
main version of the firmware.
z
PT-SRQ32KC / PT-SRZ31KC / PT-SRS30KC / PT-SRQ22KC / PT-SRZ21KC /
PT-SRS20KC
Refer to "Case 1" (
x
page 7).
z
PT-SRQ13KC / PT-SRZ12KC / PT-SRS11KC / PT-SDZ21K2C / PT-SDS20K2C /
PT-SDW17K2C / PT-SDZ18K2C / PT-SDZ985C / PT-SDS955C / PT-SDW935C /
PT-SDZ981C
Refer to "Case 2" (
x
page 9).
■ Case 1
z
PT-SRQ32KC (main version of the firmware is 3.16 or later)
z
PT-SRZ31KC / PT-SRS30KC (main version of the firmware is 3.09 or later)
z
PT-SRQ22KC (main version of the firmware is 1.05 or later)
z
PT-SRZ21KC / PT-SRS20KC (main version of the firmware is 2.07 or later)
The illustrations in this procedure depict
use of the ET-D3LEW200C as an example.
1) Press the <
菜单
> button.
2)
Use the ▲ and ▼ buttons to
select [PROJECTOR SETUP],
and press the <
执行
> button.
z
The [PROJECTOR SETUP] screen
appears.
3) Use the ▲ and ▼ buttons to
select [LENS], and press the
<
执行
> button.
z
The [LENS] screen appears.
4)
Use the ▲ and ▼ buttons to
select [LENS CALIBRATION],
and press the <
执行
> button.
z
The [LENS CALIBRATION] screen
appears.
z
When the ET-D3LEU100C is
attached, a confirmation screen
appears when the <
执行
> button is
pressed. In such cases, proceed to
step 6.
1/2 PROJECTOR SETUP
PROJECTOR ID ALL
PROJECTION METHOD
LENS
OPERATION SETTING
NORMAL
LIGHT OUTPUT
100.0%
BRIGHTNESS CONTROL AUTO
STANDBY MODE NORMAL
NO SIGNAL SHUT-OFF DISABLE
NO SIGNAL LIGHTS-OUT DISABLE
INITIAL STARTUP LAST MEMORY
STARTUP INPUT SELECT LAST USED
DATE AND TIME
SUB MENU
MENU SELECT
执行
SUB MENU
MENU SELECT
LENS
LENS TYPE
ET-D3LEW200C
LENS INFORMATION SETTING
LENS MEMORY
LENS HOME POSITION
ACTIVE FOCUS OPTIMIZER
LENS CALIBRATION
执行