5 TROUBLESHOOTING GUIDE
(Refer to WIRING CONNECTION DIAGRAM)
<TROUBLE>
<CHECK>
<REMEDY>
Motor does not operate.
<CHECK POWER ADAPTOR.>
NO
Replace charging
→
→
→
→
Connect to rated voltage with the charging adaptor.
→
→
→
→
adaptor.
OK if it is approximately DC4V.
↓↓↓↓
OK
<CHECK EPILATION HEAD.>
NO
Replace epilation head.
Check if there is any deformation with skin protector.
→
→
→
→
↓↓↓↓
OK
<CHECK DRIVING BLOCK.>
NO
Repair connection of
Check continuities between (+) terminal of plug chassis and (+) terminal of
→
→
→
→
soldering part.
motor, or (-) terminal of plug chassis and (-) terminal of motor.
OK if there is continuities with switching ON without connecting charging adaptor.
↓↓↓↓
NO
<CHECK CONNECTING POINTS.>
NO
Repair connection of
Check conditions of soldering part at motor terminals, plug chassis and printed
→
→
→
→
soldering part.
circuit boards.
OK
Replace switch terminal
→
→
→
→
plate.
↓↓↓↓
OK
<CHECK MOTOR.>
NO
Replace the motor.
The motor should turn when 12V DC is applied to terminals.
→
→
→
→
Does not charge.
<CHECK RECHARGEABLE BATTERY.>
NO
Replace rechargeable
Does not light the
→
→
→
→
Okay if the voltage of rechargeable battery is more than approximately
→
→
→
→
battery.
charging indication
2.8V DC at fully charged and 2.0V DC at empty between (+) and (-) terminals.
lamp.
↓↓↓↓
OK
<CHECK MODULE.>
NO
Replace module.
Replace the (+) terminal of battery and connect the rated voltage with switch
→
→
→
→
OFF position.
Check charging current, if it is in between 115mA to 175mA.
5
ES2044-E8 / ES2047-E8
