7
may lead to inflammation through
the penetration of bacteria into the
skin. Thoroughly cleaning the
epilation discs before each use
minimizes the risk of infection.
Depending on the condition of your
skin and hairs, you may experience
some irritation (e.g. feeling of pain,
skin reddening) when you start
using the product and when
removing hairs at root level. This is
a normal reaction that will quickly
disappear.
If, after 48 hours, your skin still
shows irritations, we recommend
you to contact your physician.
In general, the skin reactions and
the sensation of pain tend to
diminish considerably with repeated
use.
If you have any doubts about using
this appliance, please consult your
physician.
In the following cases, this appliance
should only be used after
consultation with a physician.
• eczema, wounds, inflamed skin
reactions such as folliculitis
(purulent hair follicles) and
varicose veins
• around moles
• reduced immunity of skin, e.g.
diabetes mellitus, during pregnancy,
Raynaud’s disease
• hemophilia or immune deficiency
This product is designed to remove
or shave hair on legs, arms, and
sensitive areas like underarms or
the bikini-line using the appropriate
head depending on the needs.
When switched on, the appliance
must never come in contact with
the hair on your head, eyelashes,
ribbons or clothes, etc. to prevent any
danger of injury as well as to prevent
blockage or damage of the unit.
How to operate your
epilator
(Fig. 2)
Caution – The system outer foil is
very thin and can be damaged if
handled improperly. Before each
use, always check the foll for
damage. To avoid personal
injury, do not use if the foil or
other parts of the shaving head is
damaged.
Check to see that the skin protector
and discs are not damaged or
deformed. If they are then please
do not use the appliance.
Operating the epilator on AC
power (Fig. 2)
• Attach the head you wish to use.
• Slide the on/off switch to the “0”
position.
• Insert the power cord securely
into the epilator.
• Plug the AC adaptor securely into
an electrical outlet.
• Remove the cap.
• Slide the switch to the 1 position
and carry out epilation or shaving.
• After completing epilation or
shaving, slide the switch to the “0”
position.
• Unplug the power cord from the
electrical outlet and the appliance.
P00-11.ES2015(USA) 2008.3.21 19:10 ページ7
