Panasonic ES-LV9E, Руководство по эксплуатации

Страница: 21 / 80

21
Engli
sh
3
Rinse the cleaning liquid unit�
• Pour water as illustrated while tilting the
cleaning liquid unit and shaking it gently.
• You can clean with the cleaning liquid
filter removed.
After washing, be sure to attach the
cleaning liquid filter.
4
Gently wipe off any beard
trimmings attached to the
inside of the cleaning tray
(
a
) with a cloth or tissue
paper dampened with water�
•Clean the corners and uneven
parts of the cleaning tray with a
cotton swab dampened with water.

5
Prepare the new cleaning liquid�
(See page 13�)
Notes
• The cleaning liquid will decrease every time it is used,
but do not add detergent and water except when
replacing the cleaning liquid.
Doing so may deteriorate the cleaning function.
• Do not wash the self‑cleaning recharger unit with water.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or
discoloration of the parts.
Wipe with diluted soapy water.
• Some cleaning liquid components and skin oil may
separate and adhere to the cleaning liquid unit and
cleaning liquid filter. This does not indicate a problem.
► When the water does not drain from the cleaning tray
•Do not tilt the self‑cleaning recharger to pour out
water. Doing so may cause the cleaning liquid in the
cleaning liquid unit to spill or cause the self‑cleaning
recharger to malfunction.
• Beard trimmings may clog the drain at
the bottom of the cleaning tray.
In this case, you cannot clean or dry the
shaver.
1. Be sure to remove the AC adaptor
from the self‑cleaning recharger.
2. Place the self‑cleaning recharger on a
flat surface, and push the beard
trimmings down through the drain (
b
)
with a toothpick etc.

► Replacement parts
Replacement parts are available at your dealer or
Service Center.
Replacement parts
for ES‑LV9E
System outer foil WES9179
Inner blades WES9170
Special Detergent for Shaver Cleaning &
Charging System
WES4L03