1
Maintenance
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer
foils.
. Raise the trimmer and apply a drop of
oil.
. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off any
excess oil from the outer foils with a soft
cloth.
It is not necessary to oil the blades after
cleaning the shaver with the self‑cleaning
recharger. (Lubricant is included in the
cleaning detergent.)
•
Replacing the system outer foil and the inner
blades
appears on the LCD panel once a year. (This will differ
depending on usage.) We recommend checking the system
outer foil and the inner blades when it appears.
Press the Power switch for more than 0 seconds to turn off
.
system outer foil
once every year
inner blades
once every two years
Drying the shaver with the self‑cleaning recharger
1. Attach the outer foil section [
B
] to the shaver.
. Dry the shaver with self‑cleaning recharger [
F
] using
“Dry/Charge” course.
. Lubricate the shaver.
Cleaning with the brush
Clean the inner blades [
C
] using
the short brush by moving it in
direction (A).
Clean the system outer foil
[
B
2
], the shaver body and the
trimmer [
D
9
] using the long
brush.
Do not move the short brush in
direction (B) as it will damage
the inner blades and affect their
sharpness.
•
(A)
(B)
Do not use the short brush to clean the outer foils.
•
ES-LV81_EU.indb 12
2011/02/16 14:34:04
