9
TR
R
O
H
SK
CZ
PL
FIN
S
N
P
DK
E
NL
I
F
D
GB
Maintenance
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer
foils.
. Raise the trimmer and apply a drop of
oil.
. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off any
excess oil from the outer foils with a soft
cloth.
Replacing the system outer foil and the inner
blades
appears on the LCD panel once a year. (This will differ
depending on usage.) We recommend checking the system
outer foil and the inner blades when it appears.
Press the Power switch for more than 0 seconds to turn off
.
system outer foil
once every year
inner blades
once every two years
Replacing the system outer foil
1. Press the foil frame release buttons
[
D
4
] and lift the outer foil section [
B
]
upwards.
. Press the system outer foil release
buttons [
B
3
] and pull down the system
outer foil [
B
2
].
. Align the foil frame mark (
) and
the system outer foil mark ( ) and
securely attach together.
The system outer foil cannot be
reversely attached.
Always insert the system outer foil to
the foil frame when attaching to the
shaver.
. After turning the foil frame mark
(
) to the front, securely attach the
outer foil section [
B
] to the shaver until it
clicks.
•
•
1
2
3
Replacing the inner blades
1. Press the foil frame release buttons
[
D
4
] and lift the outer foil section [
B
]
upwards.
. Remove the inner blades [
C
] one at a
time.
Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
. Insert the inner blades [
C
] one at a time
until they click.
•
1
2 3
ES-LV61_EU.indb 9
2011/02/16 14:49:37