Panasonic ES-LV5A, Руководство по эксплуатации

Страница: 31 / 40

31
English
Tips for better usage
Apply the trimmer edge perpendicular to skin and move
downward.
Trimming sideburns Pre‑shave of long beards
Cleaning the shaver
We recommend cleaning the shaver after each use.
Cleaning with water
•
Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and some
water to the system outer foil.
2
Press for more than
2 seconds to activate the sonic
vibration cleaning mode.
•
Splashing of foam is suppressed.
•
The battery capacity lamps blink
in order.
•
After about 20 seconds, it will be automatically
turned off, or you can turn it off by pressing the
power switch.
3
Remove the outer foil section
and clean with running water.
•
See page 32 for attaching and
removing the outer foil section.
•
Splashing is reduced by rinsing the shaver in
sonic vibration cleaning mode.
•
After rinsing with water, shake the shaver up and
down for a few times to remove excess moisture and
then wipe off any drops of water with a dry cloth.
4
Dry the outer foil section, the
shaver, and the trimmer
completely.
•
Allow the shaver to dry in the
shade, avoid direct sunlight
and then apply oil.
5
Lubricate the shaver.
It will keep the movement of the
blade smooth and maintain a
comfort shave.
1. Apply one drop of oil to each of
the system outer foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately
fi ve seconds.
4. Switch off the shaver, and wipe off any excess oil
from the system outer foil with a soft cloth.
ES-LV5A_CH.indb 31 2016/03/11 10:19:24