English
Replacingthesystemouterfoil
1. Press the foil frame release buttons
and lift the outer foil section upwards.
. Press the system outer foil release
buttons and pull down the system
outer foil.
. Align the foil frame mark (
) and the
system outer foil mark ( ) and
securely attach together.
The system outer foil cannot be
reversely attached.
Always insert the system outer foil to
the foil frame when attaching to the
shaver.
. After turning the foil frame mark (
)
to the front, securely attach the outer
foil section to the shaver until it clicks.
•
•
1
2
3
Replacingtheinnerblades
1. Press the foil frame release buttons
and lift the outer foil section upwards.
. Remove the inner blades one at a
time.
Do not touch the edges (metal parts)
of the inner blades to prevent injury
to your hand.
. Insert the inner blades one at a time
until they click.
•
1
2 3
Replacementparts
Replacement parts are available at your dealer or
Service Center.
Replacement parts
for ES‑LT70
System outer foil
WES07
Inner blades
WES0
Cleaningtheself-cleaningrecharger
Beard trimmings may become attached to the cleaning
tray of the self‑cleaning recharger. Follow the steps
below to remove them. We recommend doing this each
time you change the detergent cartridge.
1. Be sure to remove the water tank
and the appliance plug from the
self‑cleaning recharger.
Be careful not to spill the
cleaning liquid.
•
1
. Gently wipe off any beard
trimmings attached to the inside of
the cleaning tray with a cloth or
tissue paper dampened with water.
Clean the corners and uneven
parts of the cleaning tray with a
cotton swab dampened with
water.
•
2
Содержание ES-LT70
Страница 31: ...MEMO ...
