22
Problem
Action
Cleaning liquid leaked
from the cleaning
liquid unit.
Do not press the cleaning
liquid unit removal button
during any mode.
Place the self‑cleaning
recharger horizontally.
If you use the self‑cleaning
recharger when the shaver
is wet or when soap or
shaving gel is on the shaver,
cleaning liquid may leak.
The cleaning liquid unit
cannot be removed.
Place the self‑cleaning
recharger on a hard, flat
surface.
(See page 11.)
Problem
Action
The mode does not
start.
Check that the AC adaptor
is connected to the self‑
cleaning recharger, and that
the adaptor is plugged in to
a household outlet. (See
page 14.)
Confirm that the shaver is
properly attached to the
self‑cleaning recharger.
(See page 14.)
The Clean or Dry function
may not operate under
extreme low temperatures
(approximately 0 °C or lower).
Check if the STATUS lamp
is glowing. (See page 19.)
The shaver cannot be
charged.
Gently wipe the main body
rear terminals and the
charging terminals of the
self‑cleaning recharger with
a cloth or tissue dampened
with water.
ES-LS9A_AUS.indb 22
2022/08/31 11:19:05
